You are here:

What is the general problem that the air compressor cannot be gasped

Air compressor failure to air can be caused by a variety of factors, here are some common problems and their possible causes:

Intake Valve Problems:

Unpowered or damaged inlet valves, impurities inside the air that cause poor operation, or clogged exhaust ports can cause the compressor to fail to load gas properly.

The friction between the piston seal ring of the intake valve and the cylinder due to the deterioration of the lubricating oil increases the inability to reset, which will also affect the normal loading of the air compressor.

Exhaust Valve Problems:

If the exhaust valve is damaged or jammed, the compressor cannot discharge the compressed air and load it into the reservoir.

Compressor Internal Faults:

Problems such as poor compressor sealing, worn cylinders, or loose pistons can cause air leaks or fail to pump properly.

Air Cleaner Issues:

Inadequate or clogged air filters may also cause the air compressor to fail to get air. If the air filter cannot effectively filter pollutants in the air, it will cause poor air intake to the air compressor.

Oil Problems:

Air compressors need lubricants or lubricants to keep them running. Insufficient oil or lubricant, contamination or deterioration can cause the machine to not run smoothly, which in turn affects the compression and loading of gases.

Pipeline Air Leaks:

Leakage can occur at pipe joints and bends, causing gas to be lost during the flow process, reducing air pressure and preventing the compressor from loading gas properly.

Electrical Problems:

Electrical issues such as insufficient power supply, short circuits in lines, or faulty switchboards can also cause the compressor to fail to start and load gas properly.

Pressure Switch Issues:

A faulty pressure switch may prevent the compressor from starting or stopping properly, affecting gas loading.

In order to solve the problem of air compressor not being able to get gas, it is first necessary to check and determine the specific cause, and then carry out targeted repairs or replace damaged parts. At the same time, it is also very important to regularly maintain and maintain the air compressor, which can effectively prevent the occurrence of similar problems.

Share this post
Facebook
Twitter
LinkedIn
WhatsApp